How to use

Four full routines from the family, using the directions printed on the bottles, plus the short version for every other bottle in the lineup. Work on a cool surface, out of direct sunlight.

The two-step wash

Step 1, Step 2, one rinse. The full Getaway routine.

  1. Work in the shade on a cool car.
  2. Apply Getaway Wash, Step 1 generously over every panel and let it dwell for 1 minute.
  3. Do not rinse. Apply Getaway Wash, Step 2 over every panel right behind it.
  4. Rinse thoroughly with clean water from top to bottom.
  5. Dry with a clean microfiber towel.

Wire wheels in five minutes

Spray, agitate, rinse. UNC's way.

  1. Make sure the wheel is cool to the touch.
  2. Shake UNC's Double Cup Swang Sauce and spray the whole rim, spokes and lip.
  3. Let it sit for 1 to 2 minutes while the brake dust turns into a purple runoff.
  4. Agitate with a soft wheel brush if needed.
  5. Rinse thoroughly with water. Do not let the product dry on the wheel.

Inside job

Bobo cleans, Lefty protects.

  1. Spray Bobo's Interior Makeover onto the stained or dirty area of the dash, seats or trim.
  2. Let it sit a few seconds, then wipe clean with a microfiber towel in straight, overlapping passes.
  3. Apply a small amount of Lefty's Interior Reset to an applicator pad and work it across the dash, door panels and trim.
  4. Let it absorb for a minute, then buff off the excess with a clean, dry towel.

Zero effort ceramic

Spray, wipe, flip the towel, buff.

  1. Shake Suki's Zero Effort Ceramic Mist well.
  2. Spray it onto a clean or lightly dirty panel.
  3. Wipe and spread it with a soft microfiber towel.
  4. Flip to a dry side of the towel and buff to a high-gloss, streak-free finish.

The rest of the family

Every bottle carries its full directions on the back label and on its product page. Here is the short version.

  • CandyMan's Candy Coat and Benny Blanco's Mud Bath: apply with a wash mitt or foam cannon and gently clean the surface, then rinse thoroughly and dry with a clean microfiber towel.
  • Willy's Grime Grunt and Johnny's Sons of Shine: apply with a foam cannon, pressure washer or wash mitt, let it dwell for a few minutes, agitate if needed and rinse thoroughly.
  • Chuco's Cruisin' Clean: spray onto the engine bay, undercarriage or chrome trim, give heavy buildup a minute, agitate with a brush or mitt, then rinse until the suds and grease are gone.
  • KO-Chino's Heavy Hand and Samuel's Pier Pressure: spray onto the spots, wipe with a clean microfiber towel, then rinse thoroughly and dry. Repeat on stubborn spots, and never let it dry on the surface.
  • Lil' Jon's Detail Mist: on a cool panel, mist lightly, wipe with a microfiber towel, then flip to a dry side and buff. Work one panel at a time.
  • Tommy's Spit Shine: work a small amount into the material with a cleaning brush in circular motions, wipe away the suds with a microfiber towel and let the shoes air dry away from heat.